Designed a Lamp in Fusion 360, but I don’t have a CNC machine. Part one describes my thought process of how to build this lamp without a CNC machine.
ModShapes is about product design and making things. We started out making bespoke stands for vapes.
Please subscribe! https://www.youtube.com/channel/UCvLHH254uR79Cy1xj4f_tfg
Here is the playlist for the components of the Elemental Lamp:
https://www.youtube.com/watch?v=E97xOZkzNU4&list=PLPGo4a7W87xYBovhnna21p8G5G1WheJJM
Thank you for watching!
We’re finding our footing – new videos come out every Tuesday and Friday! Thank you for watching and please subscribe…
**************@@@@@@@@@@@@@@@@@@@**************
A few things I learned – prep the wood. Use PAM or vegetable oil as a mold release. It will help with removing the tin foil later. Another thing – the wood grain was raised considerably – the same as I would expect from a coat of polyurethane at least! So keep that in mind – the grain will become part of the design detail of the mold.
This resin can be removed from the mold 12 hours or so after you pour it. It should be. Conditionally things can take longer, depending on temperature and the size of the pour of resin. So use the instructions that come with resin as your true guide.
Music on this video is a mix of:
https://soundcloud.com/k-391
https://soundcloud.com/aka-dj-quads
-~-~~-~~~-~~-~-
Please watch: “I Can’t Believe I didn’t have a plan! Making an impromptu chisel set holder out of wood…”
https://www.youtube.com/watch?v=41Hz04y_cWI
-~-~~-~~~-~~-~-